Quick answer
Cambridge & Counties Bank has launched development finance for experienced residential developers and SMEs, as Mortgage Solutions and The Intermediary reported on 2 November 2026. Loans run from £500,000 to £7.5m over terms of up to 24 months, at up to 80% of total costs with build costs fully funded, capped at 65% of the gross development value. Borrowers who stay with the bank can move from the development facility onto a term loan without exit fees, which suits developers who want to keep some of the finished homes and let them. Where total costs are more than about 81% of the end value, which means a profit margin below roughly 19% of GDV, the 65% of GDV cap bites before the 80% of costs, so run both tests on your appraisal before you assume you can borrow 80% of costs.
What has Cambridge & Counties Bank launched?
Cambridge & Counties Bank is a business bank that has lent on investment property for years and is one of the lenders profiled on our site. As Mortgage Solutions reported on 2 November 2026, it has now launched a dedicated development finance product for residential schemes. The terms on the bank's own development finance page are as follows.
- Loan size from £500,000 to £7.5m.
- Term of up to 24 months.
- Up to 80% loan to cost, with build costs fully funded.
- Up to 65% loan to gross development value.
- An arrangement fee of 2% and an exit fee of 1%, with no early repayment charges and no non-utilisation fees.
- Rolled-up interest available, so nothing is paid monthly during the build.
- Residential schemes only, including new builds, conversions, refurbishments and ground-up schemes, built with traditional methods or modular units.
The Intermediary reported that each client gets a senior property manager as a single point of contact. Jayne Follows, head of real estate finance, said "Our target borrowers will be experienced developers with a proven track record within the residential sector." Our Cambridge & Counties Bank lender profile covers its wider range.
How much of my scheme will a development lender fund?
Development lenders test the loan two ways and lend the lower figure. Loan to cost measures the loan against land plus build costs, and loan to gross development value measures it against what the finished homes will be worth. Our guide to LTV and LTGDV explains both, and gross development value explained shows how the end value is set.
Take a scheme of six houses with land at £600,000 and build costs of £1.4m, so £2m of costs in total.
- At 80% loan to cost the maximum is £1.6m.
- If the homes are worth £2.6m, 65% of GDV is £1.69m, so the cost test limits the loan to £1.6m.
- If the homes are worth £2.3m, 65% of GDV is £1,495,000, so the GDV test bites and you put in £505,000 of your own money before fees and interest.
That is why a stronger margin lets you borrow more. Our guides on how much deposit you need for development finance and how to write a development appraisal go through the numbers, and the calculators work out both tests for your scheme.
What does "build costs fully funded" mean?
It means the lender pays 100% of the agreed build budget, released in stages as the work is done, and your own money goes into the land. In the example above, the £1.4m build is funded in full and the remaining £200,000 of the loan goes towards the £600,000 land purchase. Our guide to how development finance drawdown works explains the stages, and a monitoring surveyor signs off each one before money is released.
If you need more than 80% of costs, other structures exist. Stretch senior development finance goes higher in one loan, mezzanine development finance adds a second loan on top, and joint venture development finance brings in a funding partner for a share of the profit. Our guide to the capital stack and to mezzanine and equity compares them, and 100% development finance explains when a fully funded deal is possible.
Can I move from development finance onto a term loan?
Yes, and this is the part of the launch that stands out. Borrowers who stay with Cambridge & Counties Bank can move from the development facility to a term loan without paying exit fees, so a developer who wants to keep and let some or all of the finished homes does not need a second lender. The bank's page refers to longer-term lending options once the project is complete, but does not publish rates or terms for the switch, so ask for them before you commit.
If you plan to sell, development exit finance repays the build loan and gives you longer to sell, and our guide to development exit loans explains how. If you plan to hold, compare a bridge to term structure and build to rent development finance. Our report on Allica Bank's development exit terms shows how other banks are pricing the exit.
Who will qualify for this kind of loan?
The product is for experienced residential developers, and corporate borrowers must be registered in the UK or the Crown dependencies. Most borrowers set up a special purpose vehicle, which our guide to SPVs for property development explains, and lenders usually ask for personal guarantees from the directors. Lenders will want to see the following.
- A track record of similar schemes, with costs and sale prices.
- Full planning permission, which our guide on planning permission for development finance covers.
- A fixed-price or well-evidenced build contract and an experienced contractor.
- Sales or valuation evidence for the finished homes.
Our guide to what development lenders look for sets out the full list. If this would be your first scheme, start with first-time developer finance and our guide to development finance for first-time developers, because several lenders on our panel will fund a first project with the right team around you.
Why are banks launching development loans now?
Banks see steady demand for new homes even in a flat market. Our reports on housing supply and planning reform and grey belt sites cover the policy push behind it. Costs and rates are the pressure points. The Bank of England announces its next Bank Rate decision on 5 November, one of its 2026 meeting dates, and our report on whether interest rates will go up explains why a rise is expected. House prices are close to flat, as our Nationwide October report shows, so lenders are checking GDVs carefully.
More lenders competing for good schemes is good news for developers. Banks such as Shawbrook, United Trust Bank, Hampshire Trust Bank and Paragon also fund residential schemes, and our guide to how much development finance costs shows typical pricing.
What it means for your funding
A new bank lender adds choice for schemes between £500,000 and £7.5m, and moving onto a term loan without exit fees is useful if you plan to hold the finished homes. It will not suit every project. The 65% of GDV cap limits the loan on thinner margins, the product is for experienced developers, and other lenders may lend more or price lower for your particular site. Compare the whole cost, including arrangement and exit fees, rather than the headline rate, and our guide to the true cost of development finance shows how.
We are a broker, not a lender, and we compare residential development finance, ground-up development finance and development finance lenders across our panel, including London and regional schemes. Our development finance broker page explains how we work, and Instant Quotes shows which lenders fit your scheme, your loan size and your experience, with no credit check.
Common questions
What is Cambridge & Counties Bank development finance?
A residential development loan launched in November 2026 for experienced developers and SMEs, from £500,000 to £7.5m over up to 24 months, at up to 80% loan to cost and 65% loan to GDV.
How much deposit do I need for development finance?
Usually 20% to 35% of total costs, depending on the lender and your margin. At 80% loan to cost you put in at least 20%, and more if the 65% of GDV cap gives a lower loan.
What is the difference between loan to cost and loan to GDV?
Loan to cost compares the loan with land plus build costs. Loan to GDV compares it with the value of the finished scheme. Lenders apply both and lend the lower figure.
Can development finance cover 100% of build costs?
Yes, many lenders fund the full build budget in stages, as Cambridge & Counties Bank does, while your own money goes into the land. Funding 100% of total costs usually needs a joint venture or extra security.
Can I refinance development finance onto a buy-to-let or term loan?
Yes. Cambridge & Counties Bank lets borrowers who stay with it move onto a term loan without exit fees. Otherwise a buy-to-let or commercial lender can refinance the finished homes if the rent supports the loan.
Do I need experience to get development finance?
This product is for experienced developers, but some lenders fund first-time developers with a strong professional team, a sound appraisal and a smaller scheme.
What fees come with development finance?
Typically an arrangement fee of 1% to 2%, an exit fee of 0% to 1.5%, monitoring surveyor and valuation fees, and legal costs. Cambridge & Counties Bank lists a 2% arrangement fee and a 1% exit fee.
This article reports news and published figures as at 3 November 2026. It is for general information only and is not legal, tax or financial advice. Bridge & Build Finance is a commercial finance brokerage service, not a lender. Finance is subject to status, lender criteria, valuation, underwriting and approval.
The weekly newsletter
Get articles like this by email
Our new articles on bridging, development finance, rates and the property market, and what each one means for your next deal.
- New articles every Friday
- What the news means for your deals
- Unsubscribe in one click

